Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Trusted Garage Door Installation for Van Nuys Homeowners
A Garage Door Installation in Van Nuys typically runs $700 to $2,200 depending on size, material, and insulation, and most jobs are completed within one full day. We’re Servo Garage Doors, and we’ve made 18,000+ garage doors right in Van Nuys and the surrounding San Fernando Valley since 2015. Marcus Deller, our owner, built this business on a rule that’s now written into Clause 4 of The Haven Standard: the customer sees the failed part before anyone quotes a replacement. If you’re replacing a door, you’ll see photographs of what’s wrong with the current one before we put a number in front of you. If it’s a new opening, you’ll get a written scope and a flat price before the first bracket goes on the wall. Call (213) 418-2520 and a live person answers, 24 hours a day.

What Our Garage Door Installation Service Includes
New Door Installation
New Door Installation means removing the existing door, tracks, and hardware, then fitting a complete system matched to your opening and your home’s load requirements. We don’t reuse worn track or mismatched brackets to save on cost; if the old hardware measures out of square or shows wear, it gets replaced under the same written price. In Van Nuys, where summer heat reaches the 90s and winter mornings drop into the 40s, we typically recommend insulated steel for attached garages so the adjacent room doesn’t act as a heat sink. Every new door installation ends with a documented photo record: the old hardware, the new hardware, the balance test, and the final alignment. You keep the photographs. That’s not an add-on; it’s been in our process since the company started.

Single Car Door Installation
A Single Car Door usually spans 8 to 9 feet and weighs between 130 and 200 pounds depending on panel material and insulation. Single car doors are common in the older Van Nuys tracts north of Victory Boulevard, where garages were often built narrower and set back from the alley. We measure the opening at three points across the header and both jambs, because a half-inch difference between top and bottom changes the track pitch and shortens spring life. Your written quote includes the door, track, torsion spring assembly, hinges, rollers, weatherstripping, and labor. It also includes the 365-Day Done Right Promise: if it’s not right, we make it right, per the terms page, not a handshake.

Double Car Door Installation
Double car doors span 15 to 16 feet and put far more demand on the spring system, so we spec torsion springs sized to the exact door weight, never a one-size-fits-all spring. In Van Nuys, many double garages sit on post-war lots where the driveway slopes toward the street, which means the door’s bottom seal does more work and the track’s vertical run needs careful leveling. We install double car doors with a heavier gauge track than single doors require, and we verify the spring cycle rating matches the door before we hang it. Like every Servo job in Van Nuys, the price is flat and written before any work starts, and the scope is written. There’s no separate charge you find out about once the old door is on the ground.

Custom Garage Door Installation
Custom garage door installation covers non-standard widths, unusual panel designs, and doors ordered to match specific architectural lines on houses in areas like the Encino-adjacent foothills or the mid-century pockets south of Sherman Way. We source from manufacturers who do custom sizing rather than forcing a stock door into a non-standard opening and hiding the gap with trim. Your written quote includes the manufacturer’s lead time, because a custom door is measured, ordered, and scheduled, not pulled off a truck. We’ll photograph the opening and the finished install, and we’ll deliver the manufacturer’s warranty paperwork with the photo record. Marcus has never quoted a custom door without putting the measurements in writing first.

Steel Doors
Steel doors are the most common choice in Van Nuys because they hold up to the Valley’s heat with minimal maintenance and cost less than wood or composite. Modern steel doors use a polyurethane or polystyrene core between two steel skins, which adds rigidity and thermal resistance; most Van Nuys homeowners buy a door with an R-value between R-6 and R-18 depending on whether the garage is attached. We install steel doors from Clopay, Amarr, and Wayne Dalton, and we walk you through the gauge difference between a 27-gauge and a 24-gauge steel skin before you commit. A thicker gauge costs more but resists dents from bikes, trash cans, and the errant basketball. The written price includes the full hardware package; we don’t sell you the door at one price and then itemize hinges and track as extras.

Wood Doors
Wood doors deliver a look that steel can’t match, but they require more attention in Van Nuys’s climate, where wet winters swell the joinery and dry summers shrink it. We recommend solid wood or wood composite only when the homeowner accepts the maintenance schedule, and we tell you that on the estimate. Wood doors are heavier than steel, so the torsion spring must be sized precisely; an undersized spring on a wood door fails early and drops the door hard. Servo installs wood doors with the correct spring cycle rating and documents the spring spec in your photo record. If you buy the door and the maintenance later feels like too much, we’re the ones to call for spring replacement or panel work; we’ve serviced wood doors all over Van Nuys, North Hollywood, and Studio City.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Garage Door Installation

We install and service LiftMaster and Chamberlain openers more than any other brands, and matching the opener to the door matters just as much as the door itself. A LiftMaster side-mount opener on a high-lift track in a Van Nuys garage with 10-foot ceilings gives you overhead storage room that a center-mount opener wastes. We stock the brand’s OEM parts, which means a warranty repair or a logic board replacement doesn’t turn into a two-week wait. We handle the programming, the safety sensor alignment, and the force adjustment on the day of install, and we photograph the finished wiring.
We also work on Craftsman and Raynor doors regularly. Craftsman doors are common in the older Van Nuys housing stock from the 1970s and 1980s, and many of those units still have original torsion springs that are decades past their cycle rating. Raynor builds a solid steel door, and we order their panels direct when a client needs to match an existing door rather than replace the whole system. Whether you have one of these brands or any other make, we can install it or source it. You don’t need to know the brand specification before you call. That’s what the on-site measurement and the written scope are for.
Before
AfterSigns You Need Garage Door Installation Right Now
- The door sits unevenly in the opening and won’t hold a level line. That usually means the door itself has warped or the bottom panel has taken impact damage that shifts the whole assembly. In Van Nuys, older wood doors absorb winter moisture and then twist in the summer heat; once the panel is out of plane, adjusting the track won’t fix it. You’re looking at either panel replacement or a full door installation, and the photo record from our visit will show you exactly which one makes sense.
- The bottom panel is rusted through or has a hole big enough to show daylight. The bottom panel carries the weatherstripping and takes the brunt of every rain event that hits a Van Nuys driveway. Once the steel skin is compromised, water gets into the insulation core and corrosion spreads. On older doors, replacing the bottom panel often costs close to half the price of a new door, and we’ll show you the numbers side by side before you choose.
- The door requires manual lifting even with the opener engaged. That means either the torsion spring has lost tension, the door weight has changed, or the opener’s force setting is maxed out. If the spring is original and the door is over 10 years old, you’re tracking toward a spring failure; the door’s weight alone is roughly 150 to 200 pounds, and when the spring lets go, the full load drops onto the cable and the opener. We replace springs on their own when the door is still square and sound, but when the panels are also aged, the math favors a full door.
- The door is loud enough to wake someone in the house every time it cycles. Noise isn’t just an annoyance; it’s the sound of metal riding against metal where the rollers, hinges, or track have worn out of tolerance. New installation with nylon rollers and fresh track eliminates the noise, and an insulated steel door cuts sound transmission from the street too. In Van Nuys, where many bedrooms sit directly over the garage, this one reason alone drives a lot of our installs.
- You’re selling the home and the garage door is the oldest exterior feature. A new garage door recoups more of its cost at resale than most exterior upgrades, and in Van Nuys’s 2025-2026 market, buyers notice a dented, mismatched door before they finish the driveway. We install quickly, we provide the documented photo record for your transaction file, and our written price means you know exactly what the improvement costs before we start.
Our Garage Door Installation Process - Step by Step

Everything we do is structured around Clause 1 of The Haven Standard: a flat, written price and a written scope before any work begins. Here’s what a garage door installation in Van Nuys looks like from the first call to the final photograph.
- 1
You call, a person answers, and we book the on-site visit. You reach a live dispatcher at (213) 418-2520, 24 hours a day. We take your address, the door size if you know it, and your availability. You get a named technician and an on-the-way text before we arrive, not a four-hour callback window.
- 2
The technician measures, photographs, and assesses the existing opening. Marcus’s rule is that the customer sees the failed part before anyone quotes a replacement, and that’s still how we operate. The technician measures the opening at three points across the header and both jambs, checks the door balance by hand, and photographs whatever is failing. If the opening is out of square, that goes in the written scope.
- 3
You receive a written, flat price and a written scope. The price covers the door, track, spring, hinges, rollers, weatherstripping, labor, and haul-away of the old door. If something changes during the job, the change gets a new written price before the new work starts. We don’t quote a door and then bill for “extra hardware” at the end.
- 4
Installation happens on the scheduled day, by background-checked, uniformed technicians. The truck carries the door and all associated hardware the morning of the job. We remove the old system, install the new door and track, set the torsion spring to the exact door weight, align the safety sensors, and test the full cycle multiple times. We clean the work area before we leave.
- 5
You receive the documented photo record and your warranty paperwork. Every visit ends with a photo record: the measurements, the old components, the new installation, the balance test, and the final alignment. You keep those photographs. The 365-Day Done Right Promise backs the labor, and the manufacturer’s warranty covers the door. If anything’s not right, we make it right; that’s the entire point of the documented system.
How Much Does Garage Door Installation Cost in Van Nuys?
A typical new door installation in Van Nuys runs $700 to $2,200, with the final number set by the door’s size, material, insulation rating, and whether the existing opening is square or needs correction-see our Garage Door Installation cost guide for details. A basic 8×7 non-insulated steel single door on an existing standard track lands around $700 to $1,100. An insulated 16×7 double door with a smart opener and a high-lift track runs $1,800 to $2,200. Custom wood work or oversize openings can go higher, and you’ll see that number in writing before we order anything.

What affects the price: door size and weight, insulation R-value, steel gauge, window inserts if you want them, whether the existing track can be reused or must be replaced, and whether the opener carries your door’s new weight. What doesn’t affect the price: your ZIP code, the time of day, or the technician’s mood. We quote flat, line-item numbers, and we don’t pad for the Valley.
To avoid overpaying, get a written scope and compare it against ours. If another company gives you a written estimate, bring the paperwork and we’ll give you a free second opinion on it, no coupon required. A free estimate from Servo includes the on-site measurement, the door recommendation, the written price, and the written scope. You get all of that before you commit to anything, and the price you’re quoted is the price you pay.
Garage Door Installation Near Van Nuys - Our Service Area

We install garage doors throughout Van Nuys and the surrounding San Fernando Valley communities. That includes Garage Door Installation in Sherman Oaks, Garage Door Installation in Panorama City, Encino, North Hollywood, Studio City, Reseda, Northridge, Tarzana, Granada Hills, Burbank, and Beverly Hills. Most Van Nuys installation appointments are scheduled within the same week, and our trucks are staged across the Valley so we’re not driving from a warehouse in Torrance to reach your door. Call (213) 418-2520 and we’ll put a time on the calendar while you’re on the line. And if you’re comparing installers, start with our home page to see how the Haven Standard works before you book.
Serving Van Nuys, CA - Our Local Coverage Area
We’re based in the Van Nuys area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Garage Door Installation in Van Nuys

Garage door installation is the complete replacement of your garage door system, including the door panels, track, torsion spring assembly, hinges, rollers, and weatherstripping. In Van Nuys, most installations are replacements of aged or damaged doors on existing openings, though we also frame and install new openings. A full installation should always end with a documented record of what was installed and how it was balanced, which is exactly what Servo delivers on every job.
A standard single or double door installation takes one full day from arrival to final testing, assuming the existing opening is structurally sound and no unexpected framing work is found. Custom doors carry a manufacturer lead time for fabrication, usually two to four weeks, and we put that timeline in your written quote rather than making you chase it. Our team arrives when we say, works until the door cycles correctly, and leaves you with the photo record and warranty paperwork the same day.
Garage door installation in Van Nuys runs $700 to $2,200 for a complete new door system, with the final price depending on size, material, insulation, and whether the existing track can be reused. A basic single steel door starts near $700; a full insulated double door with a smart opener runs up to $2,200 or more for custom work. You’ll get a flat, written price and a written scope before any work begins, so the number on your invoice matches the number on your estimate. Call (213) 418-2520 for an exact quote on your opening.
Yes, we install and program LiftMaster and Chamberlain openers as part of new door installations, and we stock their OEM parts for warranty work and future service. A new door usually means the existing opener needs to be checked against the new door’s weight and balance, and we adjust the force settings and sensor alignment on install day. You’ll also get the programming done for wall console, keypad, and vehicle remotes before we leave.
For a door that won’t close or a spring that snapped and left the door hanging, yes; we answer calls live 24/7 and can dispatch a technician to secure the opening the same day in Van Nuys. Emergency calls are for making the door safe and functional, not for a full custom installation, which is measured and scheduled. Call (213) 418-2520 and a person answers, day or night, including holidays.
Every installation carries the manufacturer’s warranty on the door and hardware, plus our 365-Day Done Right Promise on the labor: if it’s not right, we make it right, under the terms page, not a handshake. The warranty terms are documented in your written paperwork, and you’ll know exactly what’s covered and for how long before you pay anything. We don’t sell extended warranty packages; we build the work to outlast the standard coverage.
Clear the area around the garage door track on both sides and remove anything leaning against the interior walls near the door, leaving about three feet of working space. Move vehicles out of the garage and onto the street or driveway before the technician arrives, and make sure the power outlet for the opener is accessible. If the door is the primary access to the house, arrange a temporary lock or another entry point, since the opening will be uncovered for part of the day during installation.
Schedule Your Garage Door Installation Service in Van Nuys Today
Call (213) 418-2520 and a real person will answer, take your address, and get your installation on the calendar. You’ll get a free on-site measurement, a written price, and a written scope before a single bracket goes up. No pressure, no urgency theatre, no “call for a quote” runaround. That’s Clause 1, and it’s been our rule since 2015.
Written by Marcus Deller, Owner at Servo Garage Doors Van Nuys, serving Van Nuys since 2015.






Before
After
Before
After