Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterFast, Reliable Garage Door Installation Across Glendale
Garage door installation in Glendale typically costs between $700 and $2,200 for a new door, with custom wood doors and carriage-house styles landing in the upper half of that range. Most Glendale installations are completed in one day once the door arrives from the manufacturer, though hillside properties in fire zones may need an extra week for permit review. If you’re reading this from Rossmoyne, Adams Hill, or Verdugo Woodlands, we know your garage door situation is often more complicated than a stock panel swap, and we’ll tell you exactly what’s involved before any work starts. Call (213) 418-2520 for a written, flat-price quote.
We’re Servo Garage Doors, and we’ve been installing doors across Glendale for years. Our Garage Door Installation team handles everything from standard two-car setups on the valley floor to custom-width doors on pre-war bungalows that simply won’t accept a stock 16-foot panel. We don’t ask you to trust us on faith. We document what we find, quote the price in writing before we touch anything, and leave you with a photo record of the job.
Why Servo Garage Doors Van Nuys Is Glendale’s Preferred Garage Door Installation Company
Glendale homeowners tend to research before they call. They’ve read the one-star reviews about installers who showed up with the wrong size door, or who quoted $900 and invoiced $1,900. That’s exactly the kind of thing we built our system to prevent. Every job starts with measurement, documentation, and a written price. Clause 1 of The Haven Standard requires it: a flat, written scope and price delivered before any work begins. Not a verbal estimate. Not a “call us for the final number.” A document.
Marcus Deller, who runs our Glendale operations, has walked through more pre-WWII garages in this city than most contractors have seen period. He’s measured openings in Adams Hill that were framed for a 1928 Ford, not a modern SUV. He’s pulled permits in Chevy Chase Canyon that triggered WUI overlay reviews the homeowner never saw coming. That experience matters because Glendale’s housing stock doesn’t fit a template, and neither should your door.
We answer our phones with a real person, 24 hours a day. When you call about a garage door problem in Glendale, you get a named technician and an on-the-way text, not a four-hour callback window. That’s standard procedure, not a premium tier. And every installation closes with a documented photo record: what we found, what we installed, what the hardware looks like after. You see the evidence before we leave.
Our Garage Door Installation Services in Glendale
New Door Installation
A standard new door installation in Glendale runs $700 to $2,200, depending on size, material, insulation, and opener integration. That price includes removal of the old door, new tracks, new torsion spring, hardware, and the photo record we deliver at the end. If your Glendale home has a standard 16-foot opening, this is usually a straightforward one-day job. If it doesn’t, we’ll tell you on the first visit, not the second.
Single Car Door Installation
Glendale’s 1920s through 1940s neighborhoods, Rossmoyne and the Cottage Home district in particular, are full of single-car garages with non-standard openings. A stock 9-foot door often doesn’t fit. We build to spec, which means measuring the actual framed opening, ordering the right width, and setting the hardware for the smaller radius and tighter clearances these old garages demand. The result is a door that actually seals, closes quietly, and doesn’t look like it was forced into a space it doesn’t belong.
Double Car Door Installation
For the ranch-style and mid-century homes on Glendale’s valley floor, a standard double door often makes sense. But “standard” still has variables: steel gauge, insulation rating, spring cycle rating, opener type. We walk you through the options in plain language, quote the flat price, and install with hardware rated for at least 25,000 cycles. Not 10,000. We don’t install the cheap spring that fails in four years.
Custom Garage Door Installation
Glendale has one of the most active renovation cultures in Southern California, driven in large part by a community that takes pride in craftsmanship and visible quality. Custom garage doors are common here because the houses deserve them. We’ve built carriage-house doors to match original Craftsman trim in Rossmoyne, stained wood doors that mirror the front entrance in Adams Hill, and modern glass-panel doors for the newer contemporary builds near the Americana. Every custom job starts with a written spec and a materials sample, not a catalog guess.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Glendale
We install and service doors from Clopay, Amarr, Wayne Dalton, Raynor, and more, but we’re brand-agnostic. We recommend what fits your house, your usage, and your budget, not what we have sitting in a warehouse. For Glendale homes with smart-home systems, LiftMaster and Chamberlain openers are the most common integration points we work with, especially side-mount models that are nearly silent and free up ceiling space in older garages. Our Garage Door Installation in Glendale customers consistently ask for two things: quiet operation and a door that doesn’t look like it came from a big-box store. We stock accordingly.
Common Garage Door Installation Problems We See in Glendale Homes
- Non-standard pre-war openings. Rossmoyne and Adams Hill bungalows routinely have garage door openings under 8 feet wide. Installers who bring stock 9-foot or 16-foot panels leave homeowners with oversized doors, gaps in the weather seal, and tracks that bind. We measure before we order, every time.
- WUI fire-zone permit gaps. Hillside parcels in Chevy Chase Canyon and Verdugo Woodlands fall inside California’s Very High Fire Hazard Severity Zones. A door replacement there requires ember-resistant or fire-rated components, and skipping the permit review can trigger a stop-work order after the old door is already in the dumpster.
- Heat-baked seals and weatherstripping. Glendale summers routinely top 100°F, and south- or west-facing doors take the brunt. We upgrade to high-temp rubber and vinyl on new installations in exposed spots, because a seal that fails in one season isn’t a seal, it’s a warranty claim waiting to happen.
- Santa Ana wind stress on hillside tracks. Wind funneling through the Verdugo passes puts real lateral force on panels and tracks in the hills. We set tracks with that load in mind, and we check the mounting hardware on every installation in the wind-exposed zones.
Pricing for Garage Door Installation in Glendale, CA
We publish our price ranges because Clause 1 demands a written number before work starts, and hiding the range until the technician arrives contradicts everything we built our reputation on. Here’s what Glendale homeowners can expect:
| Service | Price Range |
|---|---|
| New Door Installation | $700-$2,200 |
| Custom Garage Door | $700-$2,200 |
| Wood Doors | $700-$2,200 |
What moves you within that range: door size, material (steel, wood, composite), insulation value, window inserts, and opener type. A 16-foot steel door with no windows and a basic opener sits near the bottom. A custom-width wood carriage-house door with a side-mount smart opener and matched stain sits near the top. Either way, you get the written price before we order anything, and that price is the price. If you have a written estimate from another company, bring it. We’ll give you a free second opinion against it.
We Also Serve Cities Near Glendale
Our Glendale crews also cover Burbank, North Hollywood, Studio City, and West Hollywood. Burbank’s flat, grid-planned lots rarely raise the fire-zone questions that come up in Chevy Chase Canyon, but the pre-war garages there have their own quirks. If you’re a few blocks over the city line, call us anyway. We’ll tell you if we can get a technician out, and it’s usually yes.
Serving Glendale, CA - Our Local Coverage Area
We’re based in the Glendale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Installation in Glendale
Yes, if your parcel falls within California’s Very High Fire Hazard Severity Zone, you need a permit review that checks for ember resistance and fire rating on the new door. This is a WUI building code requirement, and it applies to a significant portion of Glendale’s hillside neighborhoods including Chevy Chase Canyon and Verdugo Woodlands. We handle the paperwork and work with the city’s overlay review, but the review adds time, usually about a week. Call (213) 418-2520 and we’ll check your parcel’s zone status before you spend anything.
Yes, we build custom wood and wood-look doors to spec and match stain to the existing trim. We recently replaced a 1930s Craftsman home’s single-car door in Rossmoyne with a custom-width Clopay wood carriage-house door. The original opening measured just 7’6″ wide, so we built a sectional door to spec, upgraded to a LiftMaster side-mount opener with smart-home integration, and matched the stain to the home’s existing trim. That’s not a hypothetical. It’s a job we did, and we can show you the photo record.
Usually because the torsion spring was undersized or the tracks weren’t aligned to the tighter clearances of a pre-war garage. These old single-car openings have less headroom and narrower side clearance than modern garages, and many installers force a standard kit into a space it wasn’t designed for. The opener works harder, the spring wears faster, and the door gets louder over time. We correct spring rate and track alignment as part of every Glendale installation, and a side-mount opener like the LiftMaster 8500W solves the headroom problem entirely.
They put lateral pressure on panels and tracks, especially on exposed hillside lots where wind gusts funnel through the passes. Over time, that stress loosens mounting hardware and bends light-gauge tracks. For installations in those zones, we upsize the track gauge, anchor the mounting points more heavily, and double-check the balance so the door doesn’t drift under load. It’s a cheap insurance that prevents a 60-mile-an-hour gust from turning your door into a sail.
Yes. LiftMaster and Chamberlain openers with MyQ integration work with most major smart-home platforms, and the side-mount models are particularly popular in Glendale’s older garages where ceiling space is tight. We’ll configure the opener, connect it to your network, and walk you through the app before we leave. If you’re replacing an older opener during a door installation, we’ll quote the integration as part of the flat price, not as a surprise line item.
If you need a new garage door installed in Glendale, call (213) 418-2520. You’ll get a real person, a schedule, and a written price before any work begins. That’s how we’ve done it since day one, and that’s how we’ll do it at your house.
Written by Marcus Deller, Owner at Servo Garage Doors Van Nuys, serving Glendale and surrounding communities.