Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterTrusted Garage Door Parts for Van Nuys Homeowners
When you need Garage Door Parts in Van Nuys, you’re usually dealing with one of six components: a torsion spring, an extension spring, a cable, a roller, a hinge, or a piece of weatherstripping. We carry these parts on our trucks and stock replacements for all eight major brands, so most repairs here are completed the same day. Servo Garage Doors has made more than 18,000 garage doors right since 2015, and every single job started with a written price before any work began. That’s Clause 1 of The Haven Standard, the operating agreement Marcus Deller and our technicians work under. If you’re hearing a noise, seeing a gap, or the door simply won’t move, call (213) 418-2520 and we’ll tell you what we think it is over the phone, then confirm it in person with a photo before quoting anything.
What Our Garage Door Parts Service Includes
We do not quote a replacement part until we can show you the failed component on camera. That rule predates the company. Marcus Deller founded Servo in 2015 on one principle: the customer sees the broken part before anyone asks for money. That principle is now Clause 4 of The Haven Standard. Here’s what each part service looks like on the truck and at your door.
Torsion Spring
A torsion spring is the coiled steel component mounted horizontally above the door opening. It stores the lifting force that makes a 120-to-180-pound door feel light. When it snaps, which it does after roughly 10,000 to 15,000 cycles, the door either won’t open or drops hard onto the floor. We measure the old spring’s wire diameter, inside diameter, and length before quoting a replacement pair, because springs are matched to the door’s exact weight and height. In Van Nuys, torsion spring replacement runs $180-$340 including parts and labor, and the price is written down before we touch anything.
Extension Spring
Extension springs run along the horizontal tracks on either side of an older garage door. They stretch to store energy as the door lowers, then contract to help pull it back up. When one breaks, it’s a high-tension failure that can send steel fragments across the garage, which is why we never advise unbolting one without the right tools and release procedures. Servo technicians inspect both springs on every visit, even when only one has snapped, and we replace them as a matched pair. We also run a safety cable through the spring when it’s missing, which is a $15-$25 addition that keeps a broken spring from flying if it ever fails again.
Cables & Drums
Garage door cables are the galvanized steel wires that transfer spring force to the bottom corners of the door. The cable wraps around a drum, which is the grooved spool at each end of the torsion tube. In Van Nuys, we see cable failures most often after a roller has worn out, when the door has been forced by hand, or when the drum has slipped out of alignment and the cable has unspooled. We replace cables in matched pairs because a single new cable next to an old one creates an uneven lift. Cable repair runs $130-$250, and we photograph the frayed or snapped cable before quoting the replacement.
Rollers & Hinges
Rollers are the wheels that carry the door along the vertical and horizontal tracks. Hinges are the stamped steel joints connecting the door sections at each side and in the center. A seized roller forces the opener to work harder and can pull the door off track, while a cracked hinge concentrates stress on a single section and causes it to bow. In Sherman Oaks Garage Door Parts territory too, a full set of nylon rollers with sealed bearings runs $110-$220 installed, and we replace hinges as needed with the correct gauge for the door’s weight. The wrong hinge number is a common cause of repeat service calls from other companies, so we verify the stamp on every hinge we pull.
Weatherstripping
Weatherstripping is the vinyl or rubber seal attached to the outer edges of the door sections and the jambs. It keeps water, dust, and the late-summer Santa Ana wind-blown debris out of the garage. Garage Door Parts in Panorama City face similar conditions-enough dry-season dust and occasional heavy rain that we check weatherstripping on every parts call, even when the customer called about something else. A jamb seal replacement typically runs $90-$180 per side, and we carry black, gray, and brown profiles on the truck to match the existing door.
Bottom Seal
The bottom seal is the U-shaped rubber strip attached to the aluminum retainer along the door’s lower edge. It compresses against the concrete to block water, insects, and the fine dust that blows through the San Fernando Valley during October and November. When it’s cracked or flattened, you’ll see light under the door and water pooling in the garage after a winter storm. We replace the seal and, when the retainer is bent or corroded, we replace the retainer as well. The parts cost is low, usually $60-$120 total depending on the door width, and we photograph the old seal before the swap.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Garage Door Parts
Our technicians service all eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. We stock OEM parts for LiftMaster and Chamberlain openers on every truck, which covers the two most common openers in Studio City Garage Door Parts and Van Nuys homes. A LiftMaster logic board failure is a specific diagnosis we make with a multimeter on the motor leads, not a guess, and we show you the test reading before recommending replacement. For Chamberlain, we carry the trolley carriages, limit switches, and safety sensor kits that match the current production line, so there’s no week-long wait for a part to ship.
We also service Craftsman and Raynor doors specifically. Craftsman garage door openers were sold through Sears for decades, and many Van Nuys homes built before 2010 still have them. We keep compatible circuit boards and gear kits for the most common Craftsman models. Raynor doors are less common but we’ve serviced enough of them to know their torsion systems use specific drum profiles that generic parts don’t match. Whether you have a Craftsman opener that’s gone dark or a Raynor door that’s off balance, we’ll identify the part, show you the failure, and write the price before anything gets ordered.
BeforeAfterSigns You Need Garage Door Parts Right Now
- The door hesitates or reverses halfway down. A door that starts down and then jerks back up usually means the safety sensors are misaligned or the travel limit setting has drifted. If it happens only in the afternoon, the photo eyes may be losing their sight line when the sun hits them from the west. We can correct it, but if the logic board is the cause, it’s a $120-$320 repair in Van Nuys.
- You hear a loud bang in the garage and the door won’t move. That’s a torsion spring letting go, and it’s the single most common emergency call we take in Van Nuys. The door now sits dead weight on the floor, and the opener cannot lift it without the spring’s help. Don’t force it by hand; you’ll strip the opener gears or pull a cable off the drum. Call us and we’ll have a technician there, often same day.
- The door moves unevenly or visibly sags on one side. This points to a cable that’s lost tension or has partially unspooled from the drum. Left unaddressed, the cable can snap completely and the door can drop hard onto one corner. We photograph the drum and cable before touching anything, then quote the fix at $130-$250.
- You can see daylight under or around the door. If the bottom seal is flat or the jamb weatherstripping has pulled away, you’re letting dust, water, and pests into the garage. In Van Nuys, that dust is a year-round issue and the rainy season from November through March makes a bad seal a bigger problem. This is usually one of the most affordable fixes on our list.
- The opener runs but the door doesn’t move. That’s usually a stripped gear in a Craftsman or LiftMaster opener, or the trolley carriage has lost its connection to the chain or belt. We diagnose it by checking the drive force and watching the carriage under load. If it’s the carriage, the part is small and the repair is fast. If it’s the gear, we’ll show you the stripped teeth before we quote the replacement.
Our Garage Door Parts Process - Step by Step
- 1
You call, a person answers. A live dispatcher picks up 24/7, including holidays. You describe what’s happening, and we give you a straight answer about whether it sounds like a spring, a cable, a roller, or an opener part. We also give you the price range for that repair before the truck rolls.
- 2
Our technician arrives and shows you the part. The first thing the technician does is listen to the door run and visually inspect the components. Then they photograph the failed part, whether it’s a snapped spring, a frayed cable, a cracked hinge, or a worn roller. That photo is the first thing you see, and it’s the first thing in your documented record. Clause 4 of The Haven Standard requires it.
- 3
You receive a written price and scope. Before any part is removed, you get a flat, written price and a written list of what we’re replacing and why. There’s no range at this point, it’s an exact number. The price you see is the price you pay, and it never changes after the work starts. Clause 1 of The Haven Standard requires that too.
- 4
We do the work, with the parts we brought. For most parts calls, everything required is already on the truck. Springs, cables, rollers, hinges, seals, opener parts, and the tools to install them. We work efficiently, but we never rush through the safety verification. Every job ends with a door balance test and a full cycle test.
- 5
You get a documented photo record before we leave. The technician hands you, or sends you if you prefer a text, a photo record of the part as it was found and the part as it was installed, along with your written warranty and a summary of what was measured. The 365-Day Done Right Promise means if anything isn’t right, we make it right. The documentation proves what was done, which is how it should be.
How Much Does Garage Door Parts Cost in Van Nuys?
A typical garage door parts repair in Van Nuys runs $150-$600, with most jobs landing in the $180-$340 range. Torsion spring replacement is $180-$340, cable repair is $130-$250, roller replacement is $110-$220, and track realignment is $120-$240. Weatherstripping and bottom seal work is usually under $180. The biggest cost factor is the part itself: a torsion spring costs more than a hinge, a logic board costs more than a safety sensor, and a full set of rollers costs more than two. The second factor is access and condition: a rusty cable drum on a 30-year-old door takes longer to remove than a clean one, though the part price doesn’t change.
What should not affect the price is how busy we are, how expensive your house looks, or whether you called at 8 p.m. on a Sunday. Our emergency rate is the same as our standard rate. We tell you the range on the phone, then we give you an exact written price on site before any work starts. If another company gave you a written estimate, bring it and we’ll give you a Free Second Opinion on it, no coupon required. The way to avoid overpaying in Van Nuys is to demand the price in writing before anyone touches the door, and to walk away from any quote that’s delivered verbally. We don’t do verbal quotes. We never have.
Garage Door Parts Near Van Nuys - Our Service Area
We run parts calls across Van Nuys and the surrounding San Fernando Valley. Sherman Oaks, Panorama City, Encino, North Hollywood, and Studio City are all within a 20-to-35-minute drive of our dispatch point, and most calls in those areas are same-day. Reseda, Northridge, Tarzana, and Granada Hills are a bit further out, but we schedule them regularly. If you found us from Garage Door Parts in Sherman Oaks or Garage Door Parts in Panorama City, the same technician, same written pricing, and same photo record applies. We’re the same crew working under the same Haven Standard whether the door is on Van Nuys Boulevard or in Burbank or Beverly Hills.
Looking for the main home page? It covers our full garage door repair, installation, and emergency service area.
Serving Van Nuys, CA - Our Local Coverage Area
We’re based in the Van Nuys area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Garage Door Parts in Van Nuys
Garage door parts service means identifying and replacing the individual components that make a door open, close, and seal properly: torsion springs, extension springs, cables, drums, rollers, hinges, weatherstripping, and bottom seals. In Van Nuys, Servo technicians carry these parts on the truck and replace them on the same visit in most cases. We document the failed part with a photo before quoting, which is Clause 4 of The Haven Standard. That way you know the repair is real before you pay for it.
Most parts repairs take 45 to 90 minutes from the time the technician arrives. Torsion spring replacement is typically done in under an hour, cable work in 30 to 45 minutes, and weatherstripping or bottom seal in 20 to 30 minutes. We arrive with the parts on the truck, so there’s no second trip to gather materials. If we do need to order a specific part, we’ll tell you before the visit and give you a written schedule.
In Van Nuys, you can expect to pay $180-$340 for torsion spring repair, $130-$250 for cable repair, $110-$220 for roller replacement, and $60-$180 for weatherstripping or a bottom seal. Every job gets an exact written price on site before any work begins. That’s Clause 1 of The Haven Standard, and we don’t deviate from it. Call (213) 418-2520 for a free estimate and we’ll give you the range for your specific symptom over the phone.
Yes. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. LiftMaster and Chamberlain are the two most common opener brands we see in Van Nuys homes, and we stock their OEM parts on the truck: logic boards, safety sensors, trolley carriages, limit switches, and wall control panels. We can usually complete a LiftMaster or Chamberlain opener repair in one visit.
Yes. Servo answers the phone with a live person 24 hours a day, 7 days a week, including holidays. If you have a snapped spring or a door that won’t close at 2 a.m., you’ll speak to someone who can dispatch a technician, often within the hour. Emergency calls are answered by a real person, not a recording, and our emergency rate is the same as our standard rate. Call (213) 418-2520 and you’ll get a named technician and an on-the-way text.
Every part we install carries a written warranty, and we back the entire repair with our 365-Day Done Right Promise. If the repair isn’t right, we make it right. The warranty details are included in the documented record you receive after every visit. We put it in writing, not in a handshake, because a promise that exists only in conversation isn’t worth much. That’s the whole point of our standard.
Clear the area around the garage door so the technician can work safely, and if you have a security system, disarm it before we begin. Move vehicles out of the garage if you can, since we’ll be walking under the door and running cycle tests. You don’t need to have any tools ready, we bring everything. What helps most is if you can describe the symptom the way you experienced it: what you heard, what you saw, and when it started. If you have another company’s written estimate, have it ready for the Free Second Opinion.
Schedule Your Garage Door Parts Service in Van Nuys Today
If your door sounds wrong, looks wrong, or won’t move, we can put a name and a price on the problem. Call (213) 418-2520 for a free estimate, and we’ll send a background-checked, uniformed technician to your Van Nuys home with the parts on the truck. You’ll get a written price before any work starts, a photo record when the work is done, and a 365-Day Done Right Promise behind every part. Talk to a live person any hour, any day. Call (213) 418-2520.
Written by Marcus Deller, Owner at Servo Garage Doors Van Nuys, serving Van Nuys and the San Fernando Valley since 2015.